Each panel measures 122 × 280 cm and has a thickness of 3 mm.

Yes. The panels are designed for interior wall applications in homes, hotels, offices, shops and other commercial spaces.

They may be used in bathroom interiors when the wall is properly prepared and the panel edges, joints and openings are correctly finished.

Active moisture, leakage and structural dampness must be repaired before installation.

Yes, provided the tiles are clean, dry, stable and firmly attached. Loose tiles, grease, soap residue and major surface irregularities must be corrected first.

Suitable prepared surfaces may include:

• Existing tiles
• Plastered walls
• Plasterboard
• Brick surfaces
• Other clean, dry and stable interior walls

Use an adhesive suitable for PVC wall panels and for the specific installation surface. Follow the adhesive manufacturer’s instructions for coverage, ventilation and curing time.

Yes. Measure carefully and use a suitable cutting tool with a straight guide. Electrical power should be switched off before working around sockets or switches.

Measure the width and height of each wall separately. Divide the total wall width by the panel width of 122 cm and round up to the next whole panel.

Include additional material for cuts, corners and decorative pattern alignment.

Use a soft cloth, lukewarm water and a mild neutral cleaner. Dry the surface after cleaning.

Avoid abrasive sponges, harsh chemicals, solvents, metal scrapers and sharp tools.

The protective surface provides resistance to normal daily wear. However, sharp objects, abrasive tools and heavy impact may still damage the decorative finish.

A damaged panel may be replaced, but removal must be carried out carefully to avoid damaging the wall or neighbouring panels.

No special maintenance is normally required. Regular dust removal, gentle cleaning and prompt removal of spills are sufficient for everyday care.